Finished updating 80/20 pass for UBT documentation

Onto the next DOC!!!!

docs/Build & Automation System/UBT.md

@@ -67,15 +67,12 @@ Derived from ToolMode, used to build a *target*.
 
 `BuildConfiguration` Contains target agonstic settings.
 
-
-
 ## QueueProjectDirectory
 
 Used when retreving all project directories.
 
 Will Enqueue a `FileMetadataPrefetch.ScanProjectDirectory` call for the directory with the prefecter.
 
-
 ### ScanProjectDirectory
 
 1. Get all extension directoires for the target project directory
@@ -85,6 +82,116 @@ Will Enqueue a `FileMetadataPrefetch.ScanProjectDirectory` call for the director
 
 `Unreal.GetExtensionDirs` will do an initial scan for Platform, Restricted, and BaseDirectories, and remove them from CachedDirectories based if any of options for doing so are set.
 
-#### ScanPluginFolder
+### ScanPluginFolder
 
+Similar to ScanProject directory, recursively scans for plugin directories.
 
+- For all subdirectories :
+   1. Check if any of the files has a .uplugin extension
+      - If it does enqueue a `ScanDirectoryTree` for the `Source`  directory.
+   2. Enqueue a `ScanPluginFolder`  for the sub directory.
+
+### ScanDirectoryTree
+
+> Scan an arbitrary directory tree.
+
+#### DirectoryItem
+
+This is the main container being populated as it gets recursively iterated upn by QueueProjectDirectory and its helper functions.
+
+This is done mainly by `CacheDirectories()` which is wrapped by `EnumerateDirectories()` (called on the iteration foreach for the above queue & scanning functions).
+
+## BuildOptions
+
+Not much, just an enum that lets the user specify:
+
+- Skip Build
+- XGE Export
+- No Engine Changes
+
+## SourceFileWorkingSet & ISourceFileWorkingSet
+
+> Defines an interface which allows querying the working set. Files which are in the working set are excluded from unity builds, to improve iterative compile times.
+
+By default Unreal provides the following implmentations of the interface:
+
+- None `EmptySourceFileWorkingSet`
+- Default
+- Git `GitSourceFileWorkingSet`
+- Perforce `PerforceSourceFileWorkingSet`
+
+There is no refrences to where Default is used.
+
+If the project's provider is set to None or the flag `bGenerateProjectFiles` is set, it will use the EmptySourceFileWorkingSet (essentially disable any segmentation of the working set from the unity builds).
+
+It picks the others based on whats within the BuildConfiguration.xml located within:
+[UBT Configuration Paths from offical docs](https://docs.unrealengine.com/5.3/en-US/build-configuration-for-unreal-engine/)
+
+## BuildAsync
+
+BuildMode's async task generator.
+
+The first `BuildAsync` called within `ExecuteAysnc` is a prepper for the actual `BuildAsync`
+
+1. For all target descriptors provied:
+   1. Create & execute init scripts
+   2. Create async a `TargetMakeFile`.
+   3. If it should also do PreBuildTargets:
+      1. Add to `TargetDescriptors`
+
+It prepares the `TargetMakeFiles` and `TargetDescriptors` for the actual procedure
+
+The Actual `BuildAsync`:
+
+1. Check the ActionGraph has no conflicts for the current for the current build's make files.
+2. Make sure no paths exceed the max path length.
+3. Make a `LinkedAction` for each `TargetMakeFile`:
+   1. Convert each `TargetMakeFile` to `LinkedAction` with its `TargetDescriptor`.
+   2. If a specific `TargetDescriptor` for the make file is setup for `SpecificFilesToCompile`:
+      1. Check for `bSingleFileBuildDependents` and get all the related sources & headers. (To add to `FilesToBuild`)
+      2. Generated a list of `ProducedItems` (`FileItem` IO action element), these are added to the `MergedOutputItems` (`Hashset` of `ProducedItems`)
+4. Cleanup previous & setup current `HotReload` for a `TargetMakeFile`
+5. If there are more than one `TargetDescriptor` for the build, merged them into one list of LinkedActions.
+6. Call `GatherOutputItems` for all `TargetDescriptors`
+   > Determines all the actions that should be executed for a target (filtering for single module/file, etc..)
+7. `ActionGraph.Link` : Link all the `MergedActions` together:
+   1. Build a map from item to its action.
+   2. Check for cyclic-dependencies, if any are found an exection will be thrown.
+   3. Setup prerequisite action for each action.
+   4. Sort the action graph.
+   > For improved parallelism with local execution.
+8. Generate Prerequisite Actions based on what was setup with `MergedActions`
+9. Generate the `ActionHistory`
+10. Generate CppDependenciesCache from the TargetDescriptors
+11. Create the artifact cache if one doesn't already exist. (Place to store compiled binaries, intermediate files, and other output content). Directory is specified by the `BuildConfiguration.ArtifactDirectory`
+12. Generate a list of ModuleDependencyActions that track depedency files:
+    1. From the ActionGraph, get all outdated actions for the cpp dependencies that need to be preprocesed.
+    2. Wait for all `PreprocessActions` to execute on these dependents.
+13. Determine which actions have outdated cached artifacts and need to be built: (Stored in `ActionToOutatedFlag`)
+    1. Check al the link actions to see if its outdated and needs to be built.
+    2. Propcate outdated state for a file to its dependents. (`ProducedModules`/`ModuleOutputs`)
+    3. Check to se if external dependencies were updated. (`ImportedModules`/`ModuleImports`)
+    4. Setup `PrerequisiteActions` futher.
+    5. `ActionGraph.GatherAllOutdatadActions`:
+    > Plan the actions to execute for the build. For single file compiles, always rebuild the source file regardless of whether it's out of date.
+14. Generate a list of `LinkedAction` (`MergedActionsToExecute`) using `ActionToOutdatedFlag` and Link them to the `ActionGraph`.
+15. Foreach TargetDescriptor, check to see if a hot reload patch should be applied.
+    - Only one target can be hot-reloaded if more than one is attempted, an exception will be thrown.
+    - If There are any non-hot reload actions to execute `HotReload.CheckForLiveCodingSessionActive` will check to prevent the build from continuing if a Live coding sessions is detected. As the user needs to shutdown the editor/engine in order for this to occur.
+16. If a hot-reload target is detected, the `MergedActionsToExecute` is overwritten with a `LiveCodingActionsToExecute`.
+17. If the BuildOptions has `NoEngineChanges` set, throw an exception if any engine file modifcations are detected.
+18. Make sure build configuration can use the executor if for the `BuildPlatform` set for the `TargetDescriptors`
+19. Delete from the `ActionGraph` any outdated `ProducedItem`s (from `MergedActionsToExecute`) and save the `ActionHistory` 
+(`History`)
+20. Create directories for the outdated items.
+21. Time to execute actions:
+    1. If just exporting XGE, export the actions to an XML file.
+    2. If `WriteOutdatedActionsFile` was specified, write the actions to a JSON output.
+    3. Actually execute the actions:
+        1. If there are no `MergedActionsToExcecute` just state to the user that the target/s are up to date.
+        2. Log targets to build and toolchain info.
+        3. Set the memory per action via the `ActionExecuter`.
+        4. Wait for `actionArtifactCache` to be ready.
+        5. Execute each action with `ActionGraph.ExecuteActionsAsync`
+        6. Flush the `actionArtifactCache` of any changes.
+    4. For all the make files: Deploy the receipt of the actions via the build platform.